LOCTITE® PC 7332
LOCTITE® PC 7332 is a two-part silicon carbide filled 100% solid epoxy resin system.
LOCTITE® PC 7332 is an epoxy resin system designed to protect, rebuild and repair high wear areas of processing equipment, such as desulfurization pumps and ducts, slurry pumps and slag granulation pumps which are subjected to severe wet abrasion. Can also be used for particle abrasion under dry conditions in transport elbows, chutes and other equipment. This product is typically used in applications with an operating range of -30 to 120°C.
Extremely high fine particle wet abrasion resistance
Silicon carbide filled system
Easy to mix and apply; trowelable and non-sagging
Good dry and wet temperature resistance
Functional cure in 6 hours
Coverage: 0.74m @ 6mm thick for a 10KG kit
| Application method | Trowel |
| Applications | Protective Coating |
| Color | Gray |
| Cure type | Room Temperature (Ambient) Cure, Two Component Mix |
| Key characteristics | Chemical Resistant, Erosion Resistance: High, Sag: Non-Sag |
| Mix ratio, by volume | 4:1 |
| Mix ratio, by weight | 4:1 |
| Operating temperature | <120.0 °C (248.0 °F ) |
| Physical form | Paste |
| Recommended for use with | Metal |
| Shore hardness | 85.0 |
| Work life | 30.0 min. |
